Application of mercury injection data to Chang 6 reservoir classification in Changqing area

WEN Hua; SUN Na; TIAN Huafeng

doi:10.3969/j.issn.1673-8926.2009.02.018

Lithologic Reservoirs >

2009 , Vol. 21 >Issue 2: 91 - 93

DOI: https://doi.org/10.3969/j.issn.1673-8926.2009.02.018

Application of mercury injection data to Chang 6 reservoir classification in Changqing area

WEN Hua ,
SUN Na ,
TIAN Huafeng

Expand

Key Laboratory of Exploration Technologies for Oil and Gas Resources， Ministry of Education，Yangtze University， Jingzhou 434023， China

Online published: 2009-06-16

Fold

Abstract

Capillary pressure curve can be applied to study the characteristics of reservoir pore structure. Reservoir can be divided by using reservoir properties and pore structure characteristics. Chang 6 reservoir of Upper Triassic Yanchang Formation is studied. The result shows that the reservoir is of lowporosity and lowpermeability. According to the reservoir properties and structure characteristics, Chang 6 is divided into three types of reservoir, which provides reliable geological basis for further development.

Key words： Logistic model； grey systemmodeling； parameter estimation; output； forecast

Cite this article

WEN Hua , SUN Na , TIAN Huafeng . Application of mercury injection data to Chang 6 reservoir classification in Changqing area[J]. Lithologic Reservoirs, 2009 , 21(2) : 91 -93 . DOI: 10.3969/j.issn.1673-8926.2009.02.018

References

［1］郑荣才，王昌勇，李虹，等.鄂尔多斯盆地白豹—华池地区长6油层组物源区分析［J］.岩性油气藏，2007，19（1）:32-38.
［2］洪秀娥，戴胜群，郭建宇，等.应用毛细管压力曲线研究储层孔隙结构［J］.江汉石油学院学报，2002，24（1）：53-55.
［3］谭成仟，马娜蕊，苏超.储层油气产能的预测模型和方法［J］.地球科学与环境学报，2004，26（2）：42-45.
［4］高建华，李瑞，王改芳，等.用测井参数预测多层合试产能的方法［J］.成都理工学院学报，2002，29（3）：296-299.
［5］罗蛰潭，王允诚.油气储集层的孔隙结构［M］.北京：科学出版社，1986.
［6］张龙海，周灿灿，刘国强，等.孔隙结构对低孔低渗储集层电性及测井解释评价的影响［J］.石油勘探与开发，2006，33（6）：671-676.
［7］郑荣才，王海红，韩永林，等.鄂尔多斯盆地姬塬地区长6 段沉积相特征和砂体展布［J］.岩性油气藏，2008，20（5）：21-26.
［8］ Sullivan K B，Mcrbride E F. Diagenesis of sandstones at shale contacts and diagenetic heterogeneity，Frio Formation，Texas ［J］. AAPG Bulletin，1991，75（1）：121-138.

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References