Lithologic Reservoirs ›› 2022, Vol. 34 ›› Issue (6): 160-170.doi: 10.12108/yxyqc.20220614

• PETROLEUM ENGINEERING AND OIL & GAS FIELD DEBELOPMENT • Previous Articles    

Profile change rule during Cr3+ polymer weak gel flooding and related improving method

XIE Kun1, SU Cheng1, LIU Changlong2, MEI Jie1, YU Haitao3, HE Xin1, LU Xiangguo1   

  1. 1. Key Laboratory of Enhanced Oil and Gas Recovery of Ministry of Education, Northeast Petroleum University, Daqing 163318, Heilongjiang, China;
    2. Bohai Oilfield Research Institute, Tianjin Branch of CNOOC(China) Co., Ltd., Tianjin 300459, China;
    3. College of Earth Sciences, Northeast Petroleum University, Daqing 163318, Heilongjiang, China
  • Received:2022-01-12 Revised:2022-05-03 Online:2022-11-01 Published:2022-11-09

PDF (PC)

179

Abstract: The Cr3+ polymer week gel with molecular intra-crosslinking was used to study the influences of slug size， core permeability and crude oil viscosity on reservoir absorption profile and production profile by core displacement experiment. The experiments of plugging/profile control/flooding were carried out in Oligocene Dongying Formation in LD10-1 block of Bohai Oilfield. The results show that： （1）The slug size of profile control agent has no effect on the turning of fluid flow at both ends of injection and production and the turning time of profile，but when the slug size per unit volume exceeds 0.3 PV，the increase rate of Cr3+ polymer weak gel to enhance crude oil recovery decreases. With the increase of reservoir permeability ratio and crude oil viscosity，the turning time of fluid flow at both ends of injection and production is delayed and the turning time of profile is advanced.（2）Three measures including organic and inorganic composite gel system plugging high permeability layer，polymer microspheres regulating micro heterogeneity， and heavy oil mobility improver improving oil displacement efficiency，can be implemented at the same time，which can improve the recovery after polymer weak gel profile control and flooding.（3）The EOR mechanism of plugging/profile control/flooding combination is： plugging the dominant seepage channel to expand the macro swept volume of heterogeneous reservoir， bridging and blocking polymer microspheres in variable diameter pores or throats to realize micro fluid flow diversion， and high-efficiency oil displacement agent can enter the unswept pore throat area to play three roles， including reducing viscosity crude oil， reducing oil-water interfacial tension， and high-efficiency displacement.

Key words: polymer weak gel, profile change, plugging/profile control/flooding, physical simulation, Dongying Formation, Oligocene, LD10-1 block, Bohai Oilfield

CLC Number: 

  • TE357
[1] XIE Kun, LU Xiangguo, LI Qiang, et al. Analysis of reservoir applicability of hydrophobically associating polymer[J]. SPE Journal, 2016, 21(1):1-9.
[2] 吴晓燕, 朱洪庆, 张宁, 等. 锦州9-3油田二元复合驱产出表面活性剂的检测方法研究[J]. 油田化学, 2014, 31(3):457- 460. WU Xiaoyan, ZHU Hongqing, ZHANG Ning, et al. Detection method study on produced surfactant of binary system flooding in Jinzhou 9-3 oilfield[J]. Oilfield Chemistry, 2014, 31(3):457-460.
[3] 刘义刚, 张云宝, 谢坤, 等. Cr3+ 聚合物凝胶与水交替注入调驱作用机理:以渤海LD10-1油田为例[J]. 断块油气田, 2017, 24(2):251-254. LIU Yigang, ZHANG Yunbao, XIE Kun, et al. Profile control and flooding effect of alternative injection of Cr3+ polymer gel and water and its mechanism:Taking Bohai LD10-1 oilfield as an example[J]. Fault-Block Oil & Gas Field, 2017, 24(2):251- 254.
[4] 曹瑞波, 韩培慧, 侯维虹. 聚合物驱剖面返转规律及返转机理[J]. 石油学报, 2009, 30(2):267-270. CAO Ruibo, HAN Peihui, HOU Weihong. Section inversion rules and inversion mechanism of polymer flooding[J]. Acta Petrolei Sinica, 2009, 30(2):267-270.
[5] 许园, 叶仲斌, 陈洪, 等. 驱替液黏度对多层非均质油藏聚驱吸液剖面返转及驱油效果影响[J]. 油田化学, 2014, 31(4):549-553. XU Yuan, YE Zhongbin, CHEN Hong, et al. Effect of viscosity on profile reversal and oil-displacement efficiency of polymer flooding in multilayer heterogeneity reservoir[J]. Oilfield Chemistry, 2014, 31(4):549-553.
[6] 未志杰, 康晓东, 何春百, 等. 海上稠油聚合物驱交替注入参数优化研究[J]. 特种油气藏, 2018, 25(1):78-84. WEI Zhijie, KANG Xiaodong, HE Chunbai, et al. Alternating injection parameter optimization of polymer flooding in offshore heavy-oil reservoir[J]. Special Oil and Gas Reservoirs, 2018, 25(1):78-84.
[7] XIE Kun, CAO Weijia, LU Xiangguo, et al. Influence of water dilution on performance of chromium polymer weak gel in porous medium[J]. Journal of Dispersion Science and Technology, 2020, 41(10):1549-1558.
[8] 文佳涛, 吕坐彬, 韩雪芳, 等. JZ气田湖底扇岩性砂体沉积模式研究与应用[J]. 特种油气藏, 2020, 27(1):75-81. WEN Jiatao, LYU Zuobin, HAN Xuefang, et al. Research and application of sedimentary pattern for the sub-lacustrine fan lithologic sandbody in the JZ gas field[J]. Special Oil and Gas Reservoirs, 2020, 27(1):75-81.
[9] 谢玉洪. 中国海油近海油气勘探实践与思考[J]. 中国海上油气, 2020, 32(2):1-13. XIE Yuhong. Practices and thoughts of CNOOC offshore oil and gas exploration[J]. Chinese Offshore Oil and Gas, 2020, 32(2):1-13.
[10] 王海更, 田晓平, 崔云江, 等. 渤海油田河流相油气藏关键储量参数确定方法[J]. 石油与天然气地质, 2011, 32(2):287-292. WANG Haigeng, TIAN Xiaoping, CUI Yunjiang, et al. Calculation of key reserve parameters of fluvial reservoirs in Bohai oilfield[J]. Oil & Gas Geology, 2011, 32(2):287-292.
[11] 卢祥国, 刘义刚, 曹伟佳, 等. 实现分注分采的层内非均质岩心的制作方法及其实验方法:CN201710487705.4[P]. 2020- 09-01. LU Xiangguo, LIU Yigang, CAO Weijia, et al. The production method and experimental method of in-layer heterogeneous cores with separate injection and production:CN201710487705.4[P]. 2020-09-01.
[12] 王力群, 李超, 李其正, 等. 辽东湾盆地旅大10-1油田储层沉积学研究[J]. 岩性油气藏, 2013, 25(5):24-30. WANG Liqun, LI Chao, LI Qizheng, et al. Reservoir sedimentology of Lvda 10-1 oilfield in Liaodong Bay Basin[J]. Lithologic Reservoirs, 2013, 25(5):24-30.
[13] 杨飞. 旅大10-1区块东二下储层砂体精细描述[D]. 青岛:中国石油大学(华东), 2016. YANG Fei. Fine description reservoir sand of the lower-section of ED 2 in Lvda 10-1 block[D]. Qingdao:China University of Petroleum(East China), 2016.
[14] 刘进祥, 卢祥国, 李国桥, 等. 特高矿化度Cr3+交联聚合物溶液渗流特性及其机制[J]. 中国石油大学学报(自然科学版), 2013, 37(6):145-152. LIU Jinxiang, LU Xiangguo, LI Guoqiao, et al. Seepage characteristics and mechanism of Cr3+ cross-linked polymer solution in ultra-high salinity media[J]. Journal of China University of Petroleum(Edition of Natural Science), 2013, 37(6):145-152.
[15] 谢坤. Cr3+聚合物弱凝胶调驱效果改善方法及作用机理研究[D]. 大庆:东北石油大学, 2019. XIE Kun. Study on the method and mechanism to improve the effect of profile control and displacement of Cr3+ polymer weak gel[D]. Daqing:Northeast Petroleum University, 2019.
[16] 鲍文博, 卢祥国, 刘义刚, 等. 疏水聚合物微球制备及其缓膨和封堵效果评价[J]. 高分子通报, 2019, 32(3):51-61. BAO Wenbo, LU Xiangguo, LIU Yigang, et al. Preparation of hydrophobic polymer microspheres and evaluation of its slow swelling and plugging effect[J]. Polymer Bulletin, 2019, 32(3):51-61.
[17] 刘义刚, 李彦阅, 王楠, 等. 稠油乳化驱油机理及室内效果评价[J]. 海洋石油, 2020, 40(1):29-35. LIU Yigang, LI Yanyue, WANG Nan, et al. Emulsifying displacement mechanism of heavy oil and its laboratory effect evaluation[J]. Offshore Oil, 2020, 40(1):29-35.
[18] 卢祥国, 曹豹, 谢坤, 等. 非均质油藏聚驱提高采收率机理再认识及改善方法[J]. 石油勘探与开发, 2021, 48(1):1-8. LU Xiangguo, CAO Bao, XIE Kun, et al. EOR mechanisms of polymer flooding in a heterogeneous oil reservoir[J]. Petroleum Exploration and Development, 2021, 48(1):1-8.
[19] 卢祥国, 谢坤, 曹豹, 等. Cr3+聚合物凝胶成胶效果及其影响因素[J]. 中国石油大学学报(自然科学版), 2015, 39(3):170- 176. LU Xiangguo, XIE Kun, CAO Bao, et al. Study on gelling effect of Cr3+ polymer gel and its influence factors[J]. Journal of China University of Petroleum(Edition of Natural Science), 2015, 39(3):170-176.
[20] 李俊键, 刘洋, 高亚军, 等. 微观孔喉结构非均质性对剩余油分布形态的影响[J]. 石油勘探与开发, 2018, 45(6):1043- 1052. LI Junjian, LIU Yang, GAO Yajun, et al. Effects of microscopic pore structure heterogeneity on the distribution and morphology of remaining oil[J]. Petroleum Exploration and Development, 2018, 45(6):1043-1052.
[21] 谷建伟, 任燕龙, 王依科, 等. 基于机器学习的平面剩余油分布预测方法[J]. 中国石油大学学报(自然科学版), 2020, 44(4):39-46. GU Jianwei, REN Yanlong, WANG Yike, et al. Prediction methods of remaining oil plane distribution based on machine learning[J]. Journal of China University of Petroleum(Edition of Natural Science), 2020, 44(4):39-46.
[22] 韩培慧, 闫坤, 曹瑞波, 等. 聚驱后油层提高采收率驱油方法[J]. 岩性油气藏, 2019, 31(2):143-150. HAN Peihui, YAN Kun, CAO Ruibo, et al. Oil displacement methods for enhanced oil recovery after polymer flooding[J]. Lithologic Reservoirs, 2019, 31(2):143-150.
[23] 黄斌, 许瑞, 傅程, 等. 注采井间优势通道的多层次模糊识别方法[J]. 岩性油气藏, 2018, 30(4):105-112. HUANG Bin, XU Rui, FU Cheng, et al. Multi-level fuzzy identification method for interwell thief zone[J]. Lithologic Reservoirs, 2018, 30(4):105-112.
[24] CAO Weijia, XIE Kun, WANG Xiaoyan, et al. Starch graft copolymer and polymer gel applied in Bohai oilfield for water plugging and profile control and their mechanisms[J]. Geosystem Engineering, 2020, 23(4):197-204.
[25] 孙哲, 吴行才, 康晓东, 等. 连续相与分散相驱油体系驱油机理及其性能对比[J]. 石油勘探与开发, 2019, 46(1):116-124. SUN Zhe, WU Xingcai, KANG Xiaodong, et al. Comparison of oil displacement mechanisms and performances between continuous and dispersed phase flooding agents[J]. Petroleum Exploration and Development, 2019, 46(1):116-124.
[26] 陈宇豪, 王克亮, 李根, 等. 大粒径调剖颗粒封堵机理及深部运移性能评价[J].岩性油气藏, 2019, 31(1):159-164. CHEN Yuhao, WANG Keliang, LI Gen, et al. Plugging mechanism of large size profile control particles and deep migration performance[J]. Lithologic Reservoirs, 2019, 31(1):159-164.
[27] 卢祥国, 王树霞, 王荣健, 等. 深部液流转向剂与油藏适应性研究:以大庆喇嘛甸油田为例[J]. 石油勘探与开发, 2011, 38(5):576-582. LU Xiangguo, WANG Shuxia, WANG Rongjian, et al. Adaptability of a deep profile control agent to reservoirs:Taking the Lamadian oilfield in Daqing as an example[J]. Petroleum Exploration and Development, 2011, 38(5):576-582.
[1] TANG Shukai, GUO Tiankui, WANG Haiyang, CHEN Ming. Numerical simulation of fracture propagation law of in-fracture temporary plugging and diverting fracturing in tight reservoirs [J]. Lithologic Reservoirs, 2024, 36(4): 169-177.
[2] DONG Rou, LI Kun, YIN Jihang, XUE Yuheng, JIANG Tao, XU Guosheng. Spatial-temporal differential evolution model and reservoir control effect of Cenozoic extensional and strike-slip superimposed faults in Bodong Sag [J]. Lithologic Reservoirs, 2024, 36(3): 106-116.
[3] LIU Renjing, LU Wenming. Mechanism and field practice of enhanced oil recovery by injection-production coupling in fault block reservoirs [J]. Lithologic Reservoirs, 2024, 36(3): 180-188.
[4] NIU Chengmin, HUI Guanzhou, DU Xiaofeng, GUAN Dayong, WANG Bingjie, WANG Qiming, ZHANG Hongguo. Sedimentary model of sublacustrine fan of the third member of Paleogene Dongying Formation and large-scale oilfield discovered in western slope of Liaozhong Sag [J]. Lithologic Reservoirs, 2024, 36(2): 33-42.
[5] ZHAO Changhong, SUN Xinge, LU Yingbo, WANG Li, HU Pengcheng, XING Xiangrong, WANG Guiqing. Physical simulation experiment of steam chamber evolution in compound development of thin-layer ultra-heavy oil flooding and drainage [J]. Lithologic Reservoirs, 2023, 35(5): 161-168.
[6] QIAN Zhen, MAO Zhiqiang, ZHENG Wei, HUANG Yuanjun, CHEN Lifeng, ZENG Huiyong, LI Gang, SONG Ai. Experiment on profile control and water plugging of rubber particles in inter-well single fractured-vuggy reservoir [J]. Lithologic Reservoirs, 2023, 35(4): 161-168.
[7] XIA Qingsong, LU Jiang, YANG Peng, ZHANG Kun, YANG Chaoyi, NIE Junjie, ZHU Yunfang, LI Lifang. Microscopic pore structure characteristics of the upper member of Oligocene Xiaganchaigou Formation in Yingxi area, Qaidam Basin [J]. Lithologic Reservoirs, 2023, 35(1): 132-144.
[8] MA Kuiqian, LIU Dong, HUANG Qin. Physical simulation experiment of steam flooding in horizontal wells of Neogene heavy oil reservoir in Lvda oilfield,Bohai Sea [J]. Lithologic Reservoirs, 2022, 34(5): 152-161.
[9] ZHOU Donghong, TAN Huihuang, ZHANG Shengqiang. Seismic description technologies of Neogene composite channel sand bodies in Kenli 6-1 oilfield,Bohai Sea [J]. Lithologic Reservoirs, 2022, 34(4): 13-21.
[10] NIU Chengmin, DU Xiaofeng, WANG Qiming, ZHANG Can, DING Yiran. Formation conditions and exploration direction of large-scale lithologic reservoirs of Cenozoic in Bohai Sea [J]. Lithologic Reservoirs, 2022, 34(3): 1-14.
[11] MA Zhengwu, GUAN Dayong, WANG Qiming, LIU Yaojun, LI Xiaohui. Sedimentary characteristics and controlling factors of sublacustrine fans of the third member of Paleogene Dongying Formation in Liaozhong Sag [J]. Lithologic Reservoirs, 2022, 34(2): 131-140.
[12] YANG Hong, LIU Chenglin, WANG Feilong, TANG Guomin, LI Guoxiong, ZENG Xiaoxiang, WU Yuping. Paleoenvironment and development model of source rocks of Dongying Formation in Bozhong Sag [J]. Lithologic Reservoirs, 2021, 33(6): 81-92.
[13] DU Jiangmin, LONG Pengyu, QIN Yingmin, ZHANG Tong, MA Hongyu, SHENG Jun. Characteristics and accumulation model of Oligocene E32 reservoir in Yingxi area,Qaidam Basin [J]. Lithologic Reservoirs, 2021, 33(5): 1-10.
[14] DU Xiaofeng, WANG Qingbin, PANG Xiaojun, DAI Liming, ZHANG Can. Quantitative characterization of source-sink system of Ed3 in Shinan steep slope zone,Bozhong Depression [J]. Lithologic Reservoirs, 2018, 30(5): 1-10.
[15] ZHANG Baokang, XU Guorui, TIE Leilei, SU Xin, LU Xiangguo, YAN Dong. Optimization of technological parameters and evaluation of reservoir adaptation by water plugging and profile control: a case from Bohai SZ36-1 oilfield [J]. Lithologic Reservoirs, 2017, 29(5): 155-161.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] YANG Zhanlong,ZHANG Zhenggang,CHEN Qilin,GUO Jingyi,SHA Xuemei,LIU Wensu. Using multi-parameters analysis of seismic information to evaluate lithologic traps in continental basins[J]. Lithologic Reservoirs, 2007, 19(4): 57 -63 .
[2] FANG Chaohe, WANG Yifeng, ZHENG Dewen, GE Zhixin. Maceral and petrology of Lower Tertiary source rock in Qintong Sag, Subei Basin[J]. Lithologic Reservoirs, 2007, 19(4): 87 -90 .
[3] LIN Chengyan, TAN Lijuan, YU Cuiling. Research on the heterogeneous distribution of petroleum(Ⅰ)[J]. Lithologic Reservoirs, 2007, 19(2): 16 -21 .
[4] WANG Tianqi, WANG Jiangong, LIANG Sujuan, SHA Xuemei. Fine oil exploration of Putaohua Formation in Xujiaweizi area, Songliao Basin[J]. Lithologic Reservoirs, 2007, 19(2): 22 -27 .
[5] WANG Xiwen,SHI Lanting,YONG Xueshan,YNAG Wuyang. Study on seismic impedance inversion[J]. Lithologic Reservoirs, 2007, 19(3): 80 -88 .
[6] HE Zongbin,NI Jing,WU Dong,LI Yong,LIU Liqiong,TAI Huaizhong. Hydrocarbon saturation determined by dual-TE logging[J]. Lithologic Reservoirs, 2007, 19(3): 89 -92 .
[7] YUAN Shengxue,WANG Jiang. Identification of the shallow gas reservoir in Shanle area,Tuha Basin[J]. Lithologic Reservoirs, 2007, 19(3): 111 -113 .
[8] CHEN Fei，WEI Dengfeng，YU Xiaolei，WU Shaobo. Sedimentary facies of Chang 2 oil-bearing member of Yanchang Formation in Yanchi-Dingbian area, Ordos Basin[J]. Lithologic Reservoirs, 2010, 22(1): 43 -47 .
[9] XU Yunxia，WANG Shanshan，YANG Shuai. Using Walsh transform to improve signal-to-noise ratio of seismic data[J]. Lithologic Reservoirs, 2009, 21(3): 98 -100 .
[10] LI Jianming，SHI Lingling，WANG Liqun，WU Guangda. Characteristics of basement reservoir in Kunbei fault terrace belt in southwestern Qaidam Basin[J]. Lithologic Reservoirs, 2011, 23(2): 20 -23 .
TRENDMD:

Copyright © 2018 Lithologic Reservoirs

Support by Beijing Magtech support@magtech.com.cn