岩性油气藏 ›› 2018, Vol. 30 ›› Issue (4): 133–139.doi: 10.12108/yxyqc.20180416

• 石油工程 • 上一篇    下一篇

利用小型压裂短时间压降数据快速获取储层参数的新方法

张健1, 敬季昀2, 王杏尊2   

  1. 1. 中联煤层气有限责任公司 北京 100020;
    2. 中海油田服务股份有限公司油田生产研究院, 天津 300459
  • 收稿日期:2018-04-07 修回日期:2018-05-28 出版日期:2018-07-21 发布日期:2018-07-21
  • 作者简介:张健(1981-),男,博士,工程师,主要从事煤层气及致密气的开发管理与研究工作。地址:(100020)北京市朝阳区酒仙桥路乙21号国宾大厦中联煤层气有限责任公司。Email:zhangjian16@cnooc.com.cn。

New method for obtaining reservoir parameters with a short time of pressure drop after mini-fracturing

ZHANG Jian1, JING Jiyun2, WANG Xingzun2   

  1. 1. China United Coalbed Methane Company Limited, Beijing 100020, China;
    2. Research Institute of Production Optimization, China Oilfield Services Limited, Tianjin 300459, China
  • Received:2018-04-07 Revised:2018-05-28 Online:2018-07-21 Published:2018-07-21

PDF (PC)

264

摘要： 储层原始地层压力和有效渗透率均是对致密储层进行储层评价、压裂设计和压后配产的重要参数。目前可采用传统试井方法和常规的小型压裂压降测试方法（DFIT方法）来求取这2个参数，但这2种方法都要求较为漫长的测试时间而导致其现场应用受到限制。提出了利用小型压裂短时间压降数据快速获取致密储层原始地层压力和有效渗透率的新方法：通过准确识别小型压裂裂缝闭合后的拟线性流以快速获取储层原始地层压力；在分析液体滤失的基础上，通过模拟压裂后压降曲线并将其与实测曲线进行拟合以快速获取储层有效渗透率。实例计算表明，该方法相较常规方法可大幅缩短测试时间并准确获得储层物性参数，具有较高的现场适用性与可靠性。

Abstract: Initial reservoir pressure and effective permeability are important parameters for reservoir evaluation, fracturing design and well proration of tight reservoirs. Traditional well testing methods and DFIT method are not applicable for tight reservoirs because of the long test time. So a new method for obtaining reservoir parameters quickly with a short time of pressure drop after mini-fracturing was prospered:calculating initial reservoir pressure by identifying pseudo-linear flow regime after fracture closure accurately,and achieving the effective reservoir permeability by simulating and fitting post-fracturing pressure drop curve on the foundation of filtration analysis. At last,the calculation result indicates that this method can be used to obtain the reservoir parameters accurately and shorten the test time greatly.

中图分类号: 

  • TE355
[1] 马勇新, 雷霄, 张乔良, 等.低渗透油藏有效渗透率计算新模型——以珠江口盆地海相低渗透砂岩为例. 岩性油气藏, 2016, 28(1):117-122. MA Y X, LEI X, ZHANG Q L, et al. A new model for calculating effective permeability in low permeability reservoir:a case study of low permeability marine sediments reservoir in the Pearl River Mouth Basin. Lithologic Reservoirs, 2016, 28(1):117-122.
[2] 尹帅, 丁文龙, 单钰铭, 等.利用致密砂岩储层电导率参数求取渗透率.岩性油气藏, 2016, 28(6):117-124. YIN S, DING W L, SHAN Y M, et al. Permeability calculation of tight sandstone reservoir by conductivity parameters. Lithologic Reservoirs, 2016, 28(6):117-124.
[3] MAYERHOFER M J, EHLIG-ECONOMIDES C A, ECONOMIDES M J. Pressure transient analysis of fracture calibration tests. Journal of Petroleum Technology, 1995, 47(3):229-234.
[4] EWENS S D, IDORENYIN E H, DONNELL P O, et al. Executing minifrac tests and interpreting after-closure data for determining reservoir characteristics in unconventional reservoirs. SPE 162779, 2012.
[5] 杜军社, 李培俊, 万文胜, 等.试井资料在压裂效果评价中的应用.新疆石油地质, 2004, 25(4):433-435. DU J S, LI P J, WAN W S, et al. Application of well test data to evaluation of hydraulic fracturing performance. Xinjiang Petroleum Geology, 2004, 25(4):433-435.
[6] NOLTE K G. Background for after-closure analysis of fracture calibration tests. SPE 39407, 1997.
[7] 侯晓春, 王建平, 张文中, 等.运用小型压裂测试确定储层参数新方法.大庆石油地质与开发, 2006, 25(2):54-56. HOU X C, WANG J P, ZHANG W Z, et al. New method to determine reservoir parameters with the application of mini frac. Petroleum Geology & Oilfield Development in Daqing, 2006, 25(2):54-56.
[8] PORCU M M, RETNANTO A R, ECONMIDES M J, et al. Comprehensive fracture calibration test design. SPE 168634, 2014.
[9] BARREE R D, MISKIMINS J L, GILBERT J V. Diagnostic fracture injection tests:Common mistakes, misfires, and misdiagnoses. SPE 169539, 2014.
[10] IBRAHIM M, PIEPRZICA C. Appraising unconventional play from mini-frac test analysis, actual field case. SPE 181465, 2016.
[11] 张逸群, 余刘应, 张国锋.基于微注入压降测试的页岩气储层快速评价方法. 石油钻探技术, 2017, 45(3):107-112. ZHANG Y Q, YU L Y, ZHANG G F. Rapid evaluation of shale reservoirs based on pre-fracinjection/falloff diagnostic test. Petroleum Drilling Techniques, 2017, 45(3):107-112.
[12] 张文昌, 胡永全, 赵金洲, 等.校准测试闭合后压降分析. 断块油气田, 2010, 17(1):85-87. ZHANG W C, HU Y Q, ZHAO J Z, et al. Analysis after closure with calibration test. Fault-Block Oil & Gas Field, 2010, 17(1):85-87.
[13] HARTING T A, COX D L, MURILLO R. Application of minifalloff test to determine reservoir parameters and optimize fracture designs in a tight gas field. SPE 90455, 2004.
[14] 赵志红, 魏瑞, 梁豪.水平井分段压裂测试获取地层参数. 油气井测试, 2015, 24(3):31-34. ZHAO Z H, WEI R, LIANG H. Multi-stage fracturing and test in horizontal well to acquire formation parameter. Well Testing, 2015, 24(3):31-34.
[15] CARSLAW H S, JEAGER J C. Conduction of heat in solid. 2nd ed. Oxford:Oxford University Press, 1959:225-227.
[16] 敬季昀.水平井压后排液与支撑剂回流控制研究.成都:西南石油大学, 2014. JING J Y. The study of fluid flowback and proppant backflow for horizontal well fracturing. Chengdu:Southwest Petroleum University, 2014.
[17] 韩大匡, 陈钦雷, 闫存章.油藏数值模拟基础. 北京:石油工业出版社, 1993:131-133. HAN D K, CHEN Q L, YAN C Z. Reservoir numerical simulation. Beijing:Petroleum Industry Press, 1993:131-133.
[18] NOLTE K G. A general analysis of fracturing pressure decline with application to three models. SPE 12941, 1986.
[19] 王鸿勋, 张士诚.水力压裂设计数值计算方法.北京:石油工业出版社, 1998:247-250 WANG H X, ZHANG S C. Numerical calculation method for hydraulic fracturing design. Beijing:Petroleum Industry Press, 1998:247-250
[20] 郭大立, 赵金洲, 郭建春, 等.压裂后压降分析的三维模型和数学拟合方法. 天然气工业, 2001, 21(5):49-52. GUO D L, ZHAO J Z, GUO J C, et al. Three-dimensional model and mathematical fitting method of pressure test data after fracturing. Natural Gas Industry, 2001, 21(5):49-52.
[21] ECONOMIDES M J, NOLTE K G. Reservoir stimulation 3rd Edition. Englewood Cliffs:Prentice Hall, 2000:318-319.
[22] NOLTE K G. Fracturing-pressure analysis for nonideal behavior. Journal of Petroleum Technology, 1991, 43(2):210-218.
[1] 张雄, 王晓之, 郭天魁, 赵海洋, 李兆敏, 杨斌, 曲占庆. 顺北油田缝内转向压裂暂堵剂评价实验[J]. 岩性油气藏, 2020, 32(5): 170-176.
[2] 李南星, 张鹏, 郑锐, 马龙, 杨成亮. 气液两相嘴流新模型及应用[J]. 岩性油气藏, 2021, 33(3): 138-144.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] 魏钦廉, 郑荣才, 肖玲, 王成玉, 牛小兵. 鄂尔多斯盆地吴旗地区长6 储层特征及影响因素分析[J]. 岩性油气藏, 2007, 19(4): 45 -50 .
[2] 王东琪, 殷代印. 水驱油藏相对渗透率曲线经验公式研究[J]. 岩性油气藏, 2017, 29(3): 159 -164 .
[3] 李云，时志强. 四川盆地中部须家河组致密砂岩储层流体包裹体研究[J]. 岩性油气藏, 2008, 20(1): 27 -32 .
[4] 蒋韧，樊太亮，徐守礼. 地震地貌学概念与分析技术[J]. 岩性油气藏, 2008, 20(1): 33 -38 .
[5] 邹明亮，黄思静，胡作维，冯文立，刘昊年. 西湖凹陷平湖组砂岩中碳酸盐胶结物形成机制及其对储层质量的影响[J]. 岩性油气藏, 2008, 20(1): 47 -52 .
[6] 王冰洁，何生，倪军娥，方度. 板桥凹陷钱圈地区主干断裂活动性分析[J]. 岩性油气藏, 2008, 20(1): 75 -82 .
[7] 陈振标，张超谟，张占松，令狐松，孙宝佃. 利用NMRT2谱分布研究储层岩石孔隙分形结构[J]. 岩性油气藏, 2008, 20(1): 105 -110 .
[8] 张厚福，徐兆辉. 从油气藏研究的历史论地层-岩性油气藏勘探[J]. 岩性油气藏, 2008, 20(1): 114 -123 .
[9] 张　霞. 勘探创造力的培养[J]. 岩性油气藏, 2007, 19(1): 16 -20 .
[10] 杨午阳, 杨文采, 刘全新, 王西文. 三维F-X域粘弹性波动方程保幅偏移方法[J]. 岩性油气藏, 2007, 19(1): 86 -91 .

陇ICP备17006252号
版权所有© 2018 中国石油集团西北地质研究所有限公司《岩性油气藏》编辑部

地址：甘肃省兰州市城关区雁儿湾路535号(陇ICP备17006252号)    电话：0931-8686158;8686058;8686288    邮箱：yxyqc@petrochina.com.cn

甘公网安备 62010202002827号

本系统由北京玛格泰克科技发展有限公司设计开发