元坝高含硫气井油套环空正常起压规律

doi:10.12108/yxyqc.20180216

岩性油气藏 ›› 2018, Vol. 30 ›› Issue (2): 146–153.doi: 10.12108/yxyqc.20180216

元坝高含硫气井油套环空正常起压规律

罗伟¹, 林永茂¹, 董海峰¹, 熊昕东¹, 张志成²

1. 中国石化西南油气分公司石油工程技术研究院, 四川德阳 618000;
2. 中国石油西南油气田分公司勘探事业部, 成都 610041

收稿日期:2017-08-05 修回日期:2017-10-16 出版日期:2018-03-21 发布日期:2018-03-21
第一作者:罗伟(1986-),男,博士,工程师,主要从事油气井完井优化与井筒控制方面的研究工作。地址:(618000)四川省德阳市旌阳区龙泉山北路298号。Email:lwswpu@163.com。
基金资助:
国家重大科技专项“川西低渗气藏完井测试技术及抗高温防气窜水泥浆体系研究”（编号：2016ZX05021-005-006HZ）资助

Normal annular pressure regularity in “A” annulus for high sulphur gas wells in Yuanba gas field

LUO Wei¹, LIN Yongmao¹, DONG Haifeng¹, XIONG Xindong¹, ZHANG Zhicheng²

1. Research Institute for Engineering Technology, Sinopec Southwest Branch Company, Deyang 618000, Sichuan, China;
2. Exploration Division, PetroChina Southwest Oil & Gas Field Company, Chengdu 610041, China

Received:2017-08-05 Revised:2017-10-16 Online:2018-03-21 Published:2018-03-21

摘要/Abstract

摘要： 对于元坝这种高含硫并于近期大幅度提产的气井来讲，温度效应引起的环空压力也是一类不容忽视的井筒安全威胁。首先结合元坝气井产水并且产气中含非烃成分的实际生产情况，建立了考虑非烃校正的气液两相流井筒温度、压力计算模型和温度效应引起环空压力预测模型，通过实例计算和参数敏感性分析获得了油套环空正常起压规律，并提出了相应的环空压力控制措施。然后通过不同产气量和产水量情形的模拟计算，建立了油套环空起压类型判断图版，并将该图版进行了现场应用，实现了元坝3口重点井的起压类型判断。结果表明：降低环空流体热膨胀系数、提高环空流体等温压缩系数和油套管变形系数都是控制环空压力的有效方法；投产初期预留一定环空气腔高度有利于降低环空压力。

关键词: 堵水调剖, 参数优化, 油藏适应性, 物理模拟, 渤海SZ36-1油田

Abstract: For high Sulphur gas wells in Yuanba gas field that have a substantial increase in production, the annular pressure caused by thermal expansion effects is a kind of wellbore safety threats which cannot be ignored. Combined with the actual production situation, a wellbore temperature-pressure calculation model of gas-liquid twophase considering nonhydrocarbon correction and a prediction model of annular pressure caused by thermal expansion effects were firstly established. The normal annular pressure regularity was obtained through the example calculation and the sensitivity analysis of influencing parameters. Meanwhile, corresponding annular pressure control measures were put forward. The judgment chart of annular pressure types in the "A" annulus was established through a large number of simulation calculation with different gas production rate and water production rate. Then, the judgment chart was applied to the field, which realizes the annular pressure type judgment of three key wells in Yuanba gas field. The results show that to reduce the thermal expansion coefficient of annular fluid, to improve the isothermal compression coefficient of annular fluid and to improve the deformation coefficient of casing, are all the effective methods to control the annular pressure caused by thermal expansion effects. To reserve a part of the annular space at the beginning of production is also beneficial to reduce the annular pressure caused by thermal expansion effects.

Key words: profile control and water plugging, parameter optimization, reservoir adaptability, physical simulation, Bohai SZ36-1 oilfield

中图分类号:

TE32

罗伟, 林永茂, 董海峰, 熊昕东, 张志成. 元坝高含硫气井油套环空正常起压规律[J]. 岩性油气藏, 2018, 30(2): 146–153.

LUO Wei, LIN Yongmao, DONG Haifeng, XIONG Xindong, ZHANG Zhicheng. Normal annular pressure regularity in “A” annulus for high sulphur gas wells in Yuanba gas field[J]. Lithologic Reservoirs, 2018, 30(2): 146–153.

参考文献

[1] 李鹭光.高含硫气藏开发技术进展与发展方向.天然气工业, 2013, 33(1):18-24. LI L G. Progress in and developing orientation of technologies for the recovery and production of high-sulfur gas reservoirs in China. Natural Gas Industry, 2013, 33(1):18-24.
[2] 薛丽娜, 周小虎, 严焱诚, 等.高温酸性气藏油层套管选材探析——以四川盆地元坝气田为例.天然气工业, 2013, 33(1):85-89. XUE L N, ZHOU X H, YAN Y C, et al. Material selection of the production casing in high-temperature sour gas reservoirs in the Changxing Formation, Yuanba Gas Field, northeastern Sichuan Basin. Natural Gas Industry, 2013, 33(1):85-89.
[3] 苏镖, 龙刚, 许小强, 等.超深高温高压高含硫气井的安全完井投产技术——以四川盆地元坝气田为例. 天然气工业, 2014, 34(7):60-64. SU B, LONG G, XU X Q, et al. Safe completion and production technologies of a gas well with ultra depth, high temperature, high pressure and high H₂S content:a case from the Yuanba Gas Field in the Sichuan Basin. Natural Gas Industry, 2014, 34(7):60-64.
[4] 李海涛, 李颖, 李压辉, 等.低盐度注水提高碳酸盐岩油藏采收率.岩性油气藏, 2016, 28(2):119-126. LI H T, LI Y, LI Y H, et al. Low salinity waterflooding to enhance oil recovery of carbonate reservoirs. Lithologic Reservoirs, 2016, 28(2):119-126.
[5] 李传亮, 朱苏阳.关于油藏含水上升规律的若干问题.岩性油气藏, 2016, 28(3):1-5. LI C L, ZHU S Y. Some topics about water cut rising rule in reservoirs. Lithologic Reservoirs, 2016, 28(3):1-5.
[6] 李传亮, 朱苏阳, 刘东华, 等. 再谈滑脱效应. 岩性油气藏, 2016, 28(5):123-129. LI C L, ZHU S Y, LIU D H, et al. Another discussion on slippage effect. Lithologic Reservoirs, 2016, 28(5):123-129.
[7] 李传亮, 朱苏阳.水驱效率可达100%.岩性油气藏, 2016, 28(1):1-5. LI C L, ZHU S Y. The efficiency of water flooding can reach 100%. Litho-logic Reservoirs, 2016, 28(1):1-5.
[8] 李传亮, 朱苏阳, 聂旷, 等.恒速压汞法不能确定孔喉比.岩性油气藏, 2016, 28(6):134-139. LI C L, ZHU S Y, NIE K, et al. Pore-throat ratio can not be determined by constant-speed mercury injection method. Lithologic Reservoirs, 2016, 28(6):134-139.
[9] HASAN A R, IZGEC B, KABIR C S. Sustaining production by managing annular-pressure buildup. SPE Production & Operations, 2010, 25(2):195-203.
[10] 车争安, 张智, 施太和, 等. 高温高压高含硫气并环空流体热膨胀带压机理.天然气工业, 2010, 30(2):88-90. CHE Z A, ZHANG Z, SHI T H, et al. Mechanism of annular fluid thermal expansion pressure in HTHP sour gas wells. Natural Gas Industry, 2010, 30(2):88-90.
[11] ZHU H J, LIN Y H, ZENG D Z, et al. Calculation analysis of sustained casing pressure in gas wells. Petroleum Science, 2012, 9(1):66-74.
[12] ZHU H J, LIN Y H, ZENG D Z, et al. Mechanism and prediction analysis of sustained casing pressure in "A" annulus of CO₂ injection well. Journal of Petroleum Science and Engineering, 2012, 92-93:1-10
[13] VALADEZ T R, HASAN A R, MANNAN S, et al. Assessing wellbore integrity in sustained casing pressure annulus. SPE Drilling & Completion, 2014, 29(1):131-138.
[14] 杨进, 唐海雄, 刘正礼, 等.深水油气井套管环空压力预测模型.石油勘探与开发, 2013, 40(5):616-619. YANG J, TANG H X, LIU Z L, et al. Prediction model of casing annulus pressure for deepwater well drilling and completion operation. Petroleum Exploration and Development, 2013, 40(5):616-619.
[15] 张百灵, 杨进, 黄小龙, 等.深水井筒环空压力计算模型适应性评价.石油钻采工艺, 2015, 37(1):56-59. ZHANG B L, YANG J, HUANG X L, et al. Adaptability evaluation of calculation model of annular pressure of deepwater wellhole. Oil Drilling & Production Technology, 2015, 37(1):56-59.
[16] 张波, 管志川, 张琦, 等.深水油气井开采过程环空压力预测与分析.石油学报, 2015, 36(8):1012-1017. ZHANG B, GUAN Z C, ZHANG Q, et al. Prediction and analysis on annular pressure of deepwater well in the production stage. Acta Petrolei Sinica, 2015, 36(8):1012-1017.
[17] 张波, 管志川, 胜亚楠, 等.深水油气井井筒内流体特性对密闭环空压力的影响.石油勘探与开发, 2016, 43(5):1-7. ZHANG B, GUAN Z C, SHENG Y N, et al. Impact of wellbore fluid properties on trapped annular pressure in deepwater wells. Petroleum Exploration and Development, 2016, 43(5):1-7.
[18] JULIAN J Y, KING G E, CISMOSKI D A, et al. Downhole leak determination using fiber-optic distributed-temperature surveys at Prudhoe Bay, Alaska. SPE 107070, 2007.
[19] HULL J, GOSSELIN L, BORZEL K. Well integrity monitoring & analysis using distributed acoustic fiber optic sensors. SPE 128304, 2010.
[20] JULIAN J Y, DUERR A D, JACKSON J C, et al. Identifying small leaks with ultrasonic leak detection-lessons learned in Alaska. SPE 166418, 2013.
[21] JOHNS J E, ALOISIO F, MAYFIELD D R. Well integrity analysis in Gulf of Mexico wells using passive ultrasonic leak detection method. SPE 142075, 2011.
[22] JONES P J, KARCHER J D, RUCH A, et al. Rigless operation to restore wellbore integrity using synthetic-based resin sealants. SPE 167759, 2014.
[23] 郭绪强, 阎炜, 陈爽, 等.特高压力下天然气压缩因子模型应用评价.石油大学学报(自然科学版), 2000, 24(6):36-38. GUO X Q, YAN W, CHEN S, et al. Comparison of methods for calculating compressibility factor of natural gas at elevated high pressure. Journal of the University of Petroleum, China (Edition of Natural Science), 2000, 24(6):36-38.
[24] 杨学锋, 林永茂, 黄时祯, 等.酸性气藏气体粘度预测方法对比研究.特种油气藏, 2005, 12(5):42-46. YANG X F, LIN Y M, HUANG S Z, et al. Correlation of gas viscosity prediction methods for acidic gas reservoirs. Special Oil and Gas Reservoirs, 2005, 12(5):42-46.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

元坝高含硫气井油套环空正常起压规律

Normal annular pressure regularity in “A” annulus for high sulphur gas wells in Yuanba gas field

PDF (PC)

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

本文评价

推荐阅读 10

[1]	唐述凯, 郭天魁, 王海洋, 陈铭. 致密储层缝内暂堵转向压裂裂缝扩展规律数值模拟[J]. 岩性油气藏, 2024, 36(4): 169-177.
[2]	西智博, 廖建平, 高荣锦, 周晓龙, 雷文文. 辽河坳陷陈家断裂带北部构造演化解析及油气成藏[J]. 岩性油气藏, 2024, 36(3): 127-136.
[3]	刘仁静, 陆文明. 断块油藏注采耦合提高采收率机理及矿场实践[J]. 岩性油气藏, 2024, 36(3): 180-188.
[4]	赵长虹, 孙新革, 卢迎波, 王丽, 胡鹏程, 邢向荣, 王桂庆. 薄层超稠油驱泄复合开发蒸汽腔演变物理模拟实验[J]. 岩性油气藏, 2023, 35(5): 161-168.
[5]	钱真, 毛志强, 郑伟, 黄远军, 陈立峰, 曾慧勇, 李岗, 宋嫒. 井间单套缝洞型油藏橡胶颗粒调剖堵水实验[J]. 岩性油气藏, 2023, 35(4): 161-168.
[6]	谢坤, 苏程, 刘长龙, 梅杰, 于海涛, 何欣, 卢祥国. Cr³⁺聚合物弱凝胶调驱剖面变化规律及改善方法[J]. 岩性油气藏, 2022, 34(6): 160-170.
[7]	马奎前, 刘东, 黄琴. 渤海旅大油田新近系稠油油藏水平井蒸汽驱油物理模拟实验[J]. 岩性油气藏, 2022, 34(5): 152-161.
[8]	谢晓庆. 聚合物驱注采参数无梯度优化新算法[J]. 岩性油气藏, 2019, 31(1): 139-146.
[9]	张保康, 徐国瑞, 铁磊磊, 苏鑫, 卢祥国, 闫冬. “堵水+调剖”工艺参数优化和油藏适应性评价——以渤海SZ36-1油田为例[J]. 岩性油气藏, 2017, 29(5): 155-161.
[10]	王国庆，魏建新，刘伟方，狄帮让，雍学善，高建虎. 大型多道地震物理模拟系统设计方案及功能[J]. 岩性油气藏, 2016, 28(6): 95-102.
[11]	陈丽华. 强水敏储层矿物高温变化对储层物性的影响——以金家油田沙一段为例[J]. 岩性油气藏, 2016, 28(4): 121-126.
[12]	于天忠. 水平井化学驱物理模拟及数值模拟研究[J]. 岩性油气藏, 2013, 25(5): 104-108.
[13]	聂海峰，谭蓓，谢爽，何元元. 应用矢量井网优化小型油藏注水井位[J]. 岩性油气藏, 2013, 25(3): 123-125.
[14]	王冰，刘月田，马翠玉，李二鹏，张婷静. 凝析气单井吞吐采油注采参数优化设计[J]. 岩性油气藏, 2012, 24(5): 107-110.
[15]	翟亚梅，严玉圃，万永清，刘媛萍，夏正春. 吐玉克油田深层稠油天然气吞吐技术研究与应用[J]. 岩性油气藏, 2012, 24(4): 111-114.